Shenzhen Highfly Technology Co., Limited
Shenzhen Highfly Technology Co., Limited Quality is Our Culture!
Add to Cart
30W 12V 2.5A Power Supply Power Adapter 100% Full Load Burn-In Test Private Housing
Product Features
● DOE VI Energy Efficiency
● Private Mould Housing
● MTBF 100000 Hours
● Protection of Over-load,Over Current,Over-temperature,over charger,short circuit...
● No Load Power Consumption less than 0.1W
● AC Input full range from 90V-264VAC
● Insulation Stregth:3500/3S
● Maximum Power 125% Rated Power
● 36 Months Warranty
● Widely use for many filed such as LCD,LED Strip,CVR,Set top box ...
● CE FCC UL GS BIS SAA KC EAC Full Certificate
| MODEL | ZF120A-1202500 | |
| OUTPUT | DC VOLTAGE | 12V2A 12V 2.5A |
| RATED POWER | 30W | |
| RIPPLE & NOISE (max.) | 60mVp-p | |
| 100mvp-p | ||
| VOLTAGE TOLERANCE | +/-3.0% | |
| LINE REGULATION | +/-1.0% | |
| LOAD REGULATION | +/-3.0% | |
| SETUP, RISE TIME | lOOms,35ms/230VAC lOOms,35ms/115VAC (at full load) | |
| HOLD UP TIME (Typ.) | 60ms/230VAC l2ms/115VAC(at full load) | |
| INPUT | VOLTAGE RANGE | 90~264VAC l27~370VDC |
| FREQUENCY RANGE | 47 ~63Hz | |
| EFFICIENCY(Typ.) | 82% | |
| AC CURRENT (Typ.) | 1.9A/115VAC 1.lA/230VAC | |
| INRUSH CURRENT (Typ.) | COLD START:l8A/ll5VAC 36A/230VAC | |
| LEAKAGE CURRENT | < I mA/ 240VAC | |
| PROTECTION | OVERLOAD | 105 ~ 150% rated output power |
| Protection type : Hiccup mode, recovers automatically after fault condition is removed | ||
| Over voltage | Protection type : Hiccup mode, recovers automatically after fault condition is removed | |
| FUNCTION | REMOTE ON/OFF | RC+/RC- : 0 ~ 0.8V power on ; 4 ~ 10V power off |
| ENVIRONMENT | WORKING TEMP. | -20~+70°C |
| WORKING HUMIDITY | 20~90% RH,non-condensing | |
| STORAGE TEMP., HUMIDITY | -20~+ 85°C , 10~95% RH | |
| TEMP. COEFFICIENT | +/-0.04%/°C (0~50°C) | |
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes | |
| SAFETY & | SAFETY STANDARDS | UL60950-1,TUVEN60950-1 approved |
| EMC | WITHSTAND VOLTAGE | I/p-0/P: 3KVAC ]/p-FG: 1 .5KVAC 0/p-FG: 0.5KVAC |
| ISOLATION RESISTANCE | I/P-0/P, I/P-FG, 0/P-FG: 100M Ohms/500VDC | |
| EMC EMISSION | Compliance to EN55011,EN55022(ClSPR22)ClassB,EN61000-3-2,'3 | |
There are EU US UK Brazil AU AC Plug ,and DC connector can be alligator or
5.5*2.1MM,5.5*2.5MM,6.0*3.0MM,4.0*1.7MM,2.5*0.4mm,3.5*1.35mm,
7.5*5.0mm,3.5*1.1MM... all kind of dc jack.
Please see the below production chart, 90% problem of usb charger power
adapter is usually caused by electronic component,false soldering,
so enough testing step is essential,especially the burn-in test,this is key to
prevent defective electronic part and false soldering,please see the below
blue words part,including the raw material inspection we have 10 step
test.We have inspection for each small step,we have intelligent burn-in
room,our product 100% full load 4 hours burn-in test.After these ten step
testing,our defective rate can be controlled to be less than 0.1%.Much more
lower then average 0.3%.
We use PE bag packing the product first,then come into below kind of carton.In this way the product can be properly protected during transportation.
For Shipping, we usually use DHL, TNT, FeDex to ship the sample, they can reach most of area worldwide in 7 days, for large quantity we strongly suggest to by sea ,it can save much more cost.
Our product have Certificate of CE FCC UL GS BIS EAC,KC,ROHS
We always attend various of exhibition